Foam Roof Recoating in Phoenix

A recoat can add years to a foam roof you already own — without the cost and disruption of a full tear-off. If your commercial foam roof is aging but still sound underneath, you may not need a new roof. A foam roof recoat — a fresh protective elastomeric coating over your existing foam — seals the surface, restores reflectivity, and extends the roof’s life. Stapleton Roofing installs and recoats commercial foam roofs across the Phoenix metro. Call (602) 833-7663 or Request an Estimate. ROC #269773.

What is a foam roof recoat?

A recoat is a new protective coating applied over an existing spray polyurethane foam (SPF) roof that is still in serviceable condition. The foam underneath stays in place; the coating is what takes the Arizona sun, rain, and foot traffic. When that coating wears thin, water can reach the foam — recoating renews the protection before that happens.

Recoat vs. replace — how to tell

Recoat is usually the right call when: the foam is mostly sound, leaks are limited, and the roof’s structure is solid. Replacement is usually the right call when: the foam is saturated or badly damaged across large areas, or the roof has reached the end of its service life. The honest answer comes from an inspection, not a phone quote.

What a recoat does for a building owner

Extends roof life: with proper maintenance, foam roofing systems can last 20+ years, and they can typically be recoated rather than replaced at the end of their service life. Lower cooling costs: a fresh white, reflective coating reflects sunlight instead of absorbing it. Fewer leaks: a seamless, renewed coating removes worn spots where water finds its way in. Less disruption: no tear-off, so the building typically stays operational throughout the project.

What does a recoat cost?

Recoating an existing foam roof in serviceable condition typically runs $1.50–$3.00 per square foot, against $4–$7 per square foot for a new foam system with elastomeric coating. Actual price depends on roof condition, size, and access — an inspection confirms it.

Foam over metal roofs, too

Many warehouses and industrial buildings have metal roofs. Stapleton can spray foam over a metal roof when it is decked in with plywood first — plywood over the existing panels, then SPF, with no full tear-off. Our recent foam-over-metal project at Velocity Truck Centers in Tolleson, AZ is featured in How to Improve Metal Roof Efficiency in Phoenix.

Our process

1. Free inspection — we check whether the foam qualifies for a recoat.
2. Prep — clean the surface and repair the spots that need it.
3. Recoat — apply the protective elastomeric coating.
4. Walk-through — you see the finished roof before we leave.

Who this is for

Warehouses, retail centers, schools, churches, medical offices, industrial plants, restaurants, and office buildings across Phoenix, Glendale, Peoria, Scottsdale, Tempe, Mesa, Chandler, Goodyear, Avondale, and Surprise.

Ready to find out if your roof qualifies for a recoat? Call (602) 833-7663 or Request an Estimate. Stapleton Roofing, 4070 W Clarendon Ave, Phoenix, AZ 85019.